Type: Trad, 110 ft (33 m)
FA: ???
Page Views: 417 total · 8/month
Shared By: Colin Parker on Oct 23, 2020
Admins: Mike Morley, Adam Stackhouse, Salamanizer Ski, Justin Johnsen, Vicki Schwantes

You & This Route


3 Opinions
Your To-Do List: Add To-Do ·
Your Star Rating:
Rating Rating Rating Rating Rating      Clear Rating
Your Difficulty Rating:
-none- Change
Your Ticks:Add New Tick
-none-
Use onX Backcountry to explore the terrain in 3D, view recent satellite imagery, and more. Now available in onX Backcountry Mobile apps! For more information see this post.

Description Suggest change

This route is kind of a crimpfest that follows a seam up to a slabby finish then into a groove to the anchors. The bottom has some nice rock and movement and then the business begins after the third bolt or so. From there it's non-stop crimping to the final bolt.  At this point you can move left into the corner/groove and continue up the seam (1" and smaller cams helpful) or you can connect into the top of Ore Chute by moving out onto the steep left face with large holds .  When you first get into the seam there is a pod that will take a 3" cam, or the chickenhead there can also be girth hitched. 

Note: The topo indicates this climb only requires bolts but this would mean a 30 foot runout to the anchors.  There is also "(11 bolts)" pencilled in on the topo but this would only happen if you combined the first 9 bolts of Masonic Order with the last two bolts of Mercury Bath (which is an option).

Location Suggest change

To the right of Ore Chute and left of Mercury Bath.  

Protection Suggest change

9 bolts and optional cams (3" and a few <=1" if staying in the seam at the top)

Photos

0 Comments