Mountain Project Logo
To save paper & ink, use the [Hide] controls next to photos and comments so you only print what you need.

Unnamed (submitted as Doc's Route)

5.7, Trad, 80 ft (24 m),  Avg: 1.4 from 112 votes
FA: George Bracksieck and Beverly Bien, 1994?
Colorado > Boulder > Boulder Canyon > Nip & Tuck
Warning Access Issue: Seasonal Closures 2024 - Bitty Buttress, Blob (Eagle Rock & Security Risk now open!) DetailsDrop down

Description

This is a good beginner route.

Protection

This was put up ground up.

Eds. It was retrobolted, probably unknowingly. The last two bolts are too close. You need small wires and #0 TCU for start, then clip [6] bolts to top anchors. The route starts 10 feet left of Sunset Arete.

Photos [Hide ALL Photos]

Steve T. taking a look at the upper section of Doc's Route.
[Hide Photo] Steve T. taking a look at the upper section of Doc's Route.
Start of Doc's Route.
[Hide Photo] Start of Doc's Route.
Dave Earle on Doc's Route.
[Hide Photo] Dave Earle on Doc's Route.
At the first bolt.
[Hide Photo] At the first bolt.
Steve Thomas leading Doc's Route.
[Hide Photo] Steve Thomas leading Doc's Route.
Below the first bolt.
[Hide Photo] Below the first bolt.
John Jennings.
[Hide Photo] John Jennings.

Comments [Hide ALL Comments]

Michael Walker
Loveland, CO
[Hide Comment] Good beginner route? Ha! The start is the best part, but the tiny cam stuck in the undercling (I eshewed the RPs in the cracks to that point) at the 5.7 crux is a couple feet below you, and I wouldn't want to fall on it. It was actually kind-of fun, but we were kidding each other that we were in England, on Gritstone, climbing at the crux above marginal gear. Not a really good beginner route. Jul 18, 2002
[Hide Comment] This is described as located left of "Sunset Arete"... is this the same as "Arete", which is left of the classic finger crack?

I saw some bolts here - the first one is high, and the route continues up low angle rock and a sort of a headwall. In semi-darkness it looked dicy to get to the first bolt. Sep 5, 2002
[Hide Comment] The crux 5.7 protects with a single #7 stopper at about eye level. Clip a single biner to this, and then clip the bolt once you're through. If that nut pulls out later, who cares? The other partially cruxy section is after the ledge, but the bolts here protect you real well. Maybe not such a great beginner route, since the start can be freaky.

I saw two guys trying this route in hiking boots and a 2-foot runner on that #7 stopper. You can imagine how far they got. Plus, that nut placement got stuck, and they walked around to rappel down to get it. Ha! Don't do this. You really have to rappel this route from top. Otherwise, you're in for some vertical bushwaking w/no belay. If you really wan't to, you can set up a belay/rap at the ledge with a bolt and a #2 Camalot, or something weird like that. Sep 11, 2002
[Hide Comment] I applaud the 'ground-up' style (very reasonable on this terrain) and can easily understand the qualms about this being a 'beginner route'; however, the use of clean protection at the bottom shouldn't preclude 5.7 leaders from trying this. There are two placements possible to protect the initial section, and while neither is ideal, it should be quite easy to climb back to the ground to test them if you are having any doubts about pulling past them. This is a good habit to adopt - beginner or not. (I led it w/o clipping the bolts, since the first couple also offer nut placements and the climbing is about 5.2 anyway....the last 2 bolts seem warranted though.) Sep 11, 2002
Tonya Clement
Boulder, CO
[Hide Comment] We climbed this route yesterday...after trudging through four feet of snow to get to the base. Gosh, do I sound like my grandpa telling stories of walking to school in the old days?

Here is my two cents on this one....my hubby is a "beginner leader"....this was his second lead and he cruised it...now he is 6' tall and has been climbing for three years. After he led it, he pulled the rope, and it fell leaving the first bolt clipped so I could lead with little/no risk of hitting the ground should I fall off doing the initial crux move. This is my second year of leading, and I am 5'2". I was thrilled to have the rope running through the first bolt given the ground rush potential. I agree....there was protection had I chosen to place a piece before the bolt. I actually found this section to be easy (of course - I had no risk)....it was the upper crux where the two bolts are close that I found to be the hardest moves...it is protected but a fall before the second bolt would result in hitting the ledge...it is a couple of dicey moves and very thin.

Beginner route....the verdict is still out....I vote "no." Mar 31, 2003
William McGehee
Choctaw, OK
[Hide Comment] Only a good beginner lead if the first bolt is clipped as Tonya mentioned. This was my girlfriend's first lead (sport or trad), and she's been on Supercrack Buttress with me in IC. She follows 10a trad and didn't feel comfortable clipping the first bolt. Be advised.~Wm Sep 23, 2003
[Hide Comment] I think this is a good beginner lead, depending upon what you lead. If one is just breaking into 5.7, probably not! The first bolt is high up, I did the aforementioned small cam in the undercling, I felt it was solid and did not worry going for the bolt. You gotta admit, it is 5.7, no harder. The second crux is not thin really, just have to spend a minute figuring it out. I think it's great to have a quick warmup climb before hitting other stuff on the crag! Oct 22, 2003
Rob Baumgartner
Niwot
  5.7
[Hide Comment] If you have some bouldering experience, it's an easy enough lead to do with no pro to the first bolt. May 21, 2010
Chris Zeller
Boulder, CO
 
[Hide Comment] Not the greatest route. The start is the best part of the route and the pro is reasonable if you are confortable with trad climbing. I put in a small cam in a horizontal crack low down and the nut in the undercling. Both were good placements. So, as a 5.7 trad route, it's fine but unsustained.

As a sport climb, this sucks. Once you get to the first bolt, you walk past three more to the ledge. Then there is one way too low and two above where the climbing gets fun again. So, basically there are three reasonable bolts on the thing. Would it have killed them to put one bolt down low? I guess I understand not putting bolts next to gear placements, but I think it's lousy how many grid bolted climbs have a highball boulder start, as if it's some kind of ego thing. This is clearly a beginner climb, so trade one of the plentiful bolts on the 5.0 ramp for one down low and you have a safe, beginner route. Jun 9, 2010
Sarah Meiser
Boulder, CO
 
[Hide Comment] As a fledgling 7 trad and 8 sport leader, I got freaked below the 1st bolt. The #7 stopper placement looked a bit iffy. Backed off and spotted a nice little crack from the ground. Double zero C3 saved the day, I hung on that puppy to test it... beautiful! Absolute comfort cruise from there. May 26, 2011
[Hide Comment] There are a bunch of large loose rocks near the ledge around 4/5ths of the way up. I removed a few of the melon-size rocks that were ready to knock out a belayer, but there are still some sketchy pieces up there. Be careful and you'll be fine.

Note: Most of this route can be toproped by walking out onto the ledge referenced above. Anchor yourself to the easily accessible bolt for safety, and use the large boulder in combination with the bolt to build your toprope anchor. Aug 12, 2011
Jay Eggleston
Denver
 
[Hide Comment] I placed two small cams near the bottom, and it seemed perfectly safe to me. Apr 4, 2013
Sean Brady
Spearfish, SD
 
[Hide Comment] A beginner will have trouble finding the protection placements below the first bolt. Apr 14, 2013
Tony B
Around Boulder, CO
  5.7+
[Hide Comment] Lots of scrambling in between 2 sections that make that up. While not a total bomb, there are reasons why people bolted a lot around there but not this one.
I more or less lead/bouldered/soloed everything around there in 2001 and never thought it was worthy of mention or attention. This line does protect on a few small cams low down prior to bolt #1. Here is the question - isn't that about all the protection you need? If you can do that, the rest is a cake walk. Jun 10, 2015
[Hide Comment] In 1994, I led Beverly Bien up this route. There were no bolts. Jul 8, 2015
Leo Paik
Westminster, Colorado
 
[Hide Comment] George, did you and Beverly name it? Jul 8, 2015
[Hide Comment] The pro before the first bolt is unlikely to hold due to rock quality. As is, it's just dumb, it either should have a bolt at the start, or just remove them all and return it to the original state.... Oct 26, 2015
Sam C
Boulder, CO
[Hide Comment] I found a pretty good Camalot 0.75 placement before the first bolt - behind a jug facing upwards but still.... Nov 17, 2020