Metolius Simulator 3D Specifications Help

Does anyone happen to know the dimensions of the crimps on the Metolius Simulator 3D hangboard? At https://www.metoliusclimbing.com/training_guide_3d_simulator.html it assigns each one a number for their training workouts but I can't find the exact measurements (preferably in mm). Any help would be greatly appreciated.

I've measured the smallest (#11 in the diagram) edge at about 14-15mm. And the next smallest (#6) at 17-18mm. No. 5 is probably about 22-23mm (never wrote that one down). It's super-duper-not-exact since all I did was stick a tape measure in the hold and eyeball it from underneath but close enough to follow certain training protocols (i.e.: "do yer max hangs on a 18-20mm edge").
Hope that helps.  

So Scott you’re saying #11 is smaller than #6? I initially thought number six looked like the smallest but nonetheless this is very helpful thank you

Ben Molloy wrote: So Scott you’re saying #11 is smaller than #6?

Correct.