Manslaughter charges in the death of climber Tito Traversa
|
dpmclimbing.com/articles/vi…
Tragic accident but not sure if manslaughter charges are in order. Parents are pushing this but as a dad of a young climber I would have been concerned of who my child was climbing with and whos gear he climbed on. |
|
It ain't gonna bring him back... |
|
Very sad. Such a talented kid. Equipment takes lots of care and attention. Either way he`s gone and maybe someone can learn from this. |
|
Wow, apparently frivolous lawsuits are not unique to the US. |
|
This is such a colossal fuck- up on so many levels. From the company that designed and manufactured these draw and carabiner sets, to the shop that let them go out the door without being correctly assembled, to the parent/relative that purchased these without noting their assembly, to the supervising adults at the crag who failed to perform even a basic safety check on the children's equipment before they climbed that fated day... |
|
Keep in mind that the justice systems in Europe are very different than here in the U.S. Here in the U.S., it's entirely up to the prosecutor (state employee, often elected) to decide who gets criminally prosecuted. Often in Europe, private citizens can insist on a criminal prosecution, and even wrap their civil case up into the criminal prosecution. There can even be two different "tracks" for criminal cases in Europe, too: one for the prosecutions initiated solely by the state, and another for those initiated by a private party. I am not familiar with the Italian system, so that's all the info I can give. But this may be an example of a situation in which no criminal prosecution would have happened in the U.S., but one is happening in Europe b/c the victim's family insists on it. |
|
RobC2 wrote: Somebody needs to twist in the wind for this....You're a lawyer, huh? Thats pretty fooked. |
|
of the millions of sport climbing whippers for the past 20+ years on quickdraws ... there has not been any incident im aware of with this particular failure of assembly Before the rappelling attempt, four people looked at or inspected Marovichs rappelling gear: the spotter trainee who installed the O ring, Marovich, and in the helicopter a spotter, and another helitack crewperson who did a buddy check. Marovich fell, unarrested, shortly after stepping out onto the helicopter skid. He was pronounced deceased about 30 minutes later. wildfiretoday.com/2010/03/0… |
|
Sad, sad situation. |
|
Yeah, 'Blindness' and 'Confirmation Bias' are scary things. Need to make sure to do your double checks better, not more of them, just more focused. |
|
bearbreeder wrote:of the millions of sport climbing whippers for the past 20+ years on quickdraws ... there has not been any incident im aware of with this particular failure of assembly im sure some wiseguy will bring up the petzl string on an open sling fatality a few years ago .... but that incident is a TOTALLY DIFFERENT type of accident ... UKClimbing in their rush to come up with an explanation implied that it was that type of failure, but it isnt .... for everyone here who thinks they would have spotted the problem if they were there ... consider this ... if 4 trained firefighters can miss something similar that leads to a fatality ... anyone here can as well Before the rappelling attempt, four people looked at or inspected Marovichs rappelling gear: the spotter trainee who installed the O ring, Marovich, and in the helicopter a spotter, and another helitack crewperson who did a buddy check. Marovich fell, unarrested, shortly after stepping out onto the helicopter skid. He was pronounced deceased about 30 minutes later. wildfiretoday.com/2010/03/0…Sorry bearbreeder but the misuse is super obvious in this example as it would have been to anyone fit to lead a group of climbers outdoors. Firefighters or not this seems totally obvious to me as dose the Tito case. |
|
The Company: Not sure how they are actually at fault here? Producing a piece of equipment that can be used improperly and as a result cause injury or death seems to be quite acceptable in many other sports and industries. |
|
I have no doubt that the instructors of this program are at fault.
varment... I'm with you on this one. |
|
I'm not a lawyer, but an engineer. When we release new product, we go through careful risk analysis. Included in that is looking at improper assembly. If we make a product can kind of go together, fail, and injure a customer, we'd (rightfully) be liable. A quick draw that can be assembled without the carabiner going through the dogbone while seeming to be assembled properly is improperly designed. Certainly it should have been documented in a way that you couldn't miss. |
|
1st of all, alot of draws are sold without carabiners on them. If this is the case, then it's not the manufacturer at fault. |
|
if returning to the days of yore involves some kid dying, i think i will pass on that one. it would have been a good idea for the dogbone manufacturer to have a small tag showing how to assemble correctly. |
|
NOt my point. But on most all eqipment, there are user assume risk or serious injury or death. I thought I had read that this kid had climbed 5.14..Seems like instructors weren't needed..The lesson here is that all who step on the rock take their, and their partners safety into account. Not sure how much experience the average poster on this thread has, but you can certainly tell which are the modern additions to the "sport". Suck it up, and pay friggin attention! |
|
No, actually it doesn't limit liability. Many products ship unassembled, or with various possible configurations. If anything it increases the requirements on design verification. The customer shouldn't be able to develop a combination that isn't safe. They presumably unknowingly designed a piece of personal protective equipment, where a reasonable assembly error could create a life threatening issue. |
|
PatCleary wrote:No, actually it doesn't limit liability. Many products ship unassembled, or with various possible configurations. If anything it increases the requirements on design verification. The customer shouldn't be able to develop a combination that isn't safe. They presumably unknowingly designed a piece of personal protective equipment, where a reasonable assembly error could create a life threatening issue. The documentation that ships with this may cover the issue, and may address the issue. I agree, the customer screwed up, and didn't perform the checks they should have. Maybe it sucks that the good old days where quasi-tested gear was good enough due to solid skills, lots of training, etc. have gone, but they have. Unfortunately, at least under US law, those aren't good enough reason for this product failure. Patrick Edit: There is an acceptance of risk argument. Although my understanding is that runs more to the risk of gear tearing out of the rock. I personally don't think it'd be strong enough to counter a decided design flaw and that it runs more to the risk of gear tearing out of the rock. I suspect this will be the deciding balance for a jury. I also don't believe the shop that sold the draws is responsible (unless they'd been notified of the design flaw). The other family may have some liability for failure to follow any documentation, but that's outside my knowledge.You know the standard ATC instructions dont tell you not to belay a second directly off the anchors ( basically no friction) ... I was almost killed by someone doing this im sure we can go through all the documentation form gear manufacturers and find ways to screw it up that they havent listed Again .... As far as i know there hasnt been a failure of this specific type since quickdraws came out .... Only on the intrawebs can we predict black swans .... After the fact of course since we all know better |
|
doug rouse wrote:NOt my point. But on most all eqipment, there are user assume risk or serious injury or death. I thought I had read that this kid had climbed 5.14..Seems like instructors weren't needed..The lesson here is that all who step on the rock take their, and their partners safety into account. Not sure how much experience the average poster on this thread has, but you can certainly tell which are the modern additions to the "sport". Suck it up, and pay friggin attention!but is a 12 year old kid realistically prepared to assess these things? my guess is probably not. to be honest with you, half of the adult climbers out there probably are not able to reliably assess these types of things. |
|
Why is everyone trying to point a finger? It's pointless to go back in the chain to find the source of the problem. Ultimately, it doesn't matter how many people screw up before you. Do your checks, for yourself, as a climber. Check your partner and their gear, as a belayer, instructor, draw-hanger, whatever. That's why we do these double checks, like many other things in climbing; it's for redundancy. It's these final checks, before a climber leaves the ground, that are the only ones that really matter in the end. It's pointless to blame anyone else earlier on in the food chain. This is climbing...not a different "profession" or sport. |