What does your Woody look like???
|
|
|
Genghis314 wrote:A group of us at a deployed location found an old empty Conex box and enough wood laying around to build a decent little woody inside the Conex box. With a few split unit A/C units and a few boxes of holds we've got a pretty decent bouldering area in the land of sand.Nice job! I sent a box of holds to Afghanistan several years ago that got used on a night vision climbing wall there. Was very cool to see. |
|
Darren Mabe wrote:Crackboard back in business:As I am just starting to build my trad rack, are passive pieces difficult to remove from the 2x4 cracks? |
|
I just finished framing my wall. Now I just need to put the T-nuts in the plywood, and put the plywood on the framing. I have a question though, and I couldn't find the answer in the forums, so I thought I'd post here. |
|
Wood kept outside needs to be sealed. Even the pressure-treated stuff will rot and warp with freeze-thaw cycles. Definitely paint/stain before installing the t-nuts, but after you've drilled the holes so you cover the sparring you get from drilling. |
|
...or paint all the boards before you drill all the t-nut holes. Easier than packing and cleaning them out later. My outdoor wall has had only 2 boards partially rot out after 16 years in the yard. That's with rain and snow, cold and heat on it. Repaint about every third year so there is a good 'waterproof' coating over the boards. |
|
There is no reason to paint your wall, ACX plywood is exterior rated. I would attempt to waterproof the back side. Either by applying a dry decking product to the under side of your deck or acrylic roofing panels to the back/top side of the wall. Worst case, tack a tarp to the back side. I am assuming you have at least a slightly overhanging wall. |
|
Had to really switch up my setup. I'm rocking the "Blank Slate Slim" right now with a Beastmaker 1000. LOVE IT! I like the Beastmaker 2000 more but there's not enough for me to warm up on on that board so the 1000 is on there for now. No holes in the wall, take it down when I want, mostly stable once you get used to it. I can't do forceful quick pull ups on it or it flexes enough to make me scared, but dead hangs and slow controlled pull ups are no problem. I highly recommend Blank Slate if you want an easy hangboard setup, and don't want to damage the walls. No affiliation, I pay full price for everything, just a happy user sharing a good product. |
|
Scott, I don't see any problems at the adjustable joint. My hinge set up is a little different than yours. I use 4 door hinges, and they are attached in the plane perpendicular to the wall so that the hinge is fully closed when the wall is completely vertical. Scott Gardiner wrote:coldatom, i made a similar wall awhile back that is adjustable. how is yours holding up at the base of the adjustable portion of the wall? |
|
|
|
Kenny Clark wrote: Has anyone not painted their outdoor woody and later regretted it? I have some leftover stain from the deck; has anyone stained their plywood? Were you happy with the results?Yes, but it seems to work. My woody has been in my backyard for 4 yrs now. 2 yrs ago I put house siding sheets on the backside of it and wished I did that early. That has stopped almost all of the decay/warping that was present before. The siding is great as almost all moisture runs right off of it. Living in Colorado is pretty dry, however when it snowed it would sit in-between the beams and soak right through the wood which has really damaged the plywood with the t-nuts. My upright supports have warped but I was expecting that and I put new ones on recently and added additional strength to them. Surprisingly the 2x4's have held up pretty well considering it has been four years. I think the siding is more effective then just paint, however if I was to do it again the paint/sealant is necessary for the long-term. Also I have had success spray-painting with t-nuts installed with minimal issues. However if you have doing any type of latex paint you can't do that over t-nuts as that will fill the holes. Here is a link to show the exposed sections of my wall and you can see all of the leaves + other junk that collects in them: andylibrande.com/homeclimbi… |
|
|
|
A friend of mine built a rad house with a big cantilevered porch: |
|
|
|
|
|
|
|
|
|
WilInBris wrote:Got made redundant, bored at home, so threw this together.....It reminds me of somebody that I used to know... ;) Nice job! |
|
ryan albery wrote:A friend of mine built a rad house with a big cantilevered porch: So I made a cool swing: And then added some slings for leading across the overhang, 30' up and 60' across, solid 5.11 and super pumpy. I'd add some climbing pictures, but last night and some whizisky had me take a 20'er and dank into a post, darn knee and noggin aren't feeling it right now. If one were so inclined towards bolting on holds (or 2x4s), there would easily be 20 some pitches on the outside of his house, and there's a 60' route inside, from the sunk in basement, up an overhanging suspended staircase and to the top of the dormer leading to the porch. The nearest town is 30 miles away, such a cool house!This place would be my dream retirement kind of place to live.....Awesome job! |
|