Mountain Project Logo

Slackline Highline Setups/gear

Original Post
Kyle Kurth · · Roach, MO · Joined Oct 2008 · Points: 0

What gear is needed to tension a 75-120ft line? The best option I have seen so far is the slackline brothers pulleys, but they are expensive. I have also heard of using chain links. Could someone point me towards a reliable source or diagram for the gear I need? college budget would be nice too.

Wade Frank · · Littleton, CO · Joined Sep 2008 · Points: 145

the chain links are great if you dont want knots in your system, I personally use some extra rap rings I have in place of the chain links on my systems. Ill see if I can dig up some pictures for you.

Kyle Kurth · · Roach, MO · Joined Oct 2008 · Points: 0

I am also interested in setting up a highline around 55ft long. Would I use the same tensioning system as the setup for a 100ft line, or is there an easier setup available for a shorter line like this?

Ryan Worsham · · West Creek, CO · Joined Jan 2009 · Points: 18

If you have to ask that then you are way in over your head. You should not high line. You know you fall onto tje line rite? Way more force than walking. Webbing does break at a certain point.

DFrench · · Cape Ann · Joined Apr 2007 · Points: 465

I could be wrong, but I'm pretty sure most people use a climbing rope taped underneath the slackline webbing and anchored as an added safety measure in case the webbing were to break...just a thought. Good luck.

Peter Franzen · · Phoenix, AZ · Joined Jan 2001 · Points: 3,730

Take all of the aluminum out of your system too. A highline should be nothing but steel.

Paul Shultz · · Hudson, Ma · Joined Jan 2009 · Points: 500

Some pulling power i've seen used is a come along... check out harbor freight tools for a good price.

Kyle Kurth · · Roach, MO · Joined Oct 2008 · Points: 0

I didn't plan on setting up a highline anytime soon. I was just wondering what gear is needed, so when I get to that point in the future, I will have bought the correct gear. Thank you to everyone who has left some advise on here. I have actually found some great systems on slackline.com

Mike Thompson · · Manchester NH · Joined Jan 2007 · Points: 460

when i set up my highline other than getting the line across the drop i didnt tighten it any other way (system wise) than i did my slacklines. what we did to get it as tight as possible was we fed the line through our system (2:3 through some locking bieners and going back through under the line so it auto locked) we tied truckers hitches or overhand on bites into the tail end of the line then had two of us clip in and pretty much walk off the cliff lol... we had to put our legs on the ledg and use them to push... then we moved up... made two more knots cliped and repeated :) we eventually got 3 guys doin it but it got a little crouded on the edge of a precipous :) ..... so theres my two sense

Kyle Kurth · · Roach, MO · Joined Oct 2008 · Points: 0

I found all of the information I needed on the slackline.com forum thanks for your help. :)

Evan1984 · · Unknown Hometown · Joined Aug 2007 · Points: 30
DFrench wrote:I could be wrong, but I'm pretty sure most people use a climbing rope taped underneath the slackline webbing and anchored as an added safety measure in case the webbing were to break...just a thought. Good luck.
Either that or a thinner piece of webbing is threaded through or taped onto the main line. THe idea is to build redundancy because the heat generated by carabiners running on the line while the slacker slides to low point can melt the webbing.
Guideline #1: Don't be a jerk.

Climbing Gear Discussion
Post a Reply to "Slackline Highline Setups/gear"

Log In to Reply
Welcome

Join the Community

Create your FREE account today!
Already have an account? Login to close this notice.

Get Started